CO2 Incubator ICOmed

Product Description

Those who can control the temperature with the highest precision can also redefine precision time and time again. The control system of the Memmert CO2 incubator ICOmed is so finely tuned that the appliance reaches the setpoint temperature very quickly and without temperature overshoots. Alarm notifications to your mobile phone guarantee the safety of the chamber load, and the battery-buffered ControlCOCKPIT ensures continuous CO2 control even when there is a power failure. Ideal hygiene is a given too: rounded edges enable easy and thorough cleaning, the interior can be sterilised within 60 minutes at 180 °C.

Unrivalled user friendliness
All parameters can be set easily and intuitively both with the operating display and the ControlCOCKPIT or the AtmoCONTROL software. The shutter box can be opened, allowing fast access to controls. Maintenance is possible even if the appliances are stacked. The incubator ICOmed has USB and Ethernet connections as well as a data logger with a ten-year storage capacity. Data can be read and programmes can be uploaded by remote access. Numerous features of the CO2 incubator ICOmed don’t let anything open to be desired:

  • Two gas connections with quick release connectors for automatic switch-over of gas bottles
  • Electropolished, seamlessly welded chamber
  • Electronic control for active humidification and dehumidification (40 to 97 % rh)
  • Control of oxygen concentration by introducing nitrogen, adjustment range from 1 % to 20 % O2

CO2 Incubator ICOmed

Model sizes/Description50105150240
Stainless steel interior
Volume, approx. l56107156241
Width, (A) mm400 560600
Height, (B) mm425480700810
Depth (less 35 mm for fan), (C) mm330400500
Max. number of perforated shelves5610 12
Max. loading per perforated shelf, kg15
Max. loading of chamber, kg7590120140
Textured stainlesssteel exterior
Width, (D) mm559719759
Height (variable through adjustable feet), (E) mm79585010701180
Depth (without door handle, depth of door handle 56 mm), (F) mm521591691
Fully insulated heated stainless steel door
●
Additional heated inner glass door
●
Standard equipment
Stainless steel shelves, perforated12
Stainless steel water dish (not applicable with option K7)1
Works calibration certificate (measuring point chamber centre) at +37 °C, 5 % CO2 for standard units●
Works calibration certificate at 37 °C, 5 % CO2, 90 % rh and 10 % O2 (requires option K7 and option T6); standard equipment for units with O2 control●
Works calibration certificate at 37 °C, 5 % CO2 and 90 % rh (requires option K7); standard equipment for units with active humidity control●
CO2 connection set: hose with coupling and clamp●
Standard sterilisation programme (without removing the sensors), humidity and CO2 sensor sterilised inside the CO2 incubator60 minutes at 180 °C
Membrane filter (in order to remove impurities and pollutants, all incoming gases pass througha membrane filter before they reach the chamber)●
Temperature
Working temperature range, °Cat least 5 above ambient temperature up to+50
Setting temperature range, °C+18 to +50
Setting accuracy, °C0.1
Temperature fluctuations with time at 37 °C (to DIN 12880:2007-05), K+/- 0.1
Temperature variation in chamber at + 37 °C (to DIN 12880:2007-05), K+/- 0.3
Humidity
Humidity limitation thanks to a Peltier element; when waterdish is full and inserted, the Peltierelement limits the value of relative humidity in the interior to 93 % rh +/- 2.5 %●
Setting range active humidity control (with option K7), % rh40 to 97 and rh-Off
Setting accuracy, % rh0.5
CO2/ O2
Digital electronic CO2control with dual beam NDIR system, with auto-diagnostic system andacoustic fault indication, barometric pressure compensation●
Setting range CO2, % CO20 to 20
Variation in time CO2, % CO2+/- 0.2
Setting accuracy CO2, % CO20.1
Setting range O2, % O21 to 20
Setting accuracy O2, % O20.1
Further data
Electrical load at 230/115 V, 50/60 Hz, approx. W1100130015001650

Related products