TC-80 THERMOSTAT

Product Description

ТС-80 hot air thermostat is intended for achievement and maintenance of a stable temperature value inside its working chamber, which is necessary for bacteriological and serological examinations in clinical centers, bacteriological laboratories, hospitals and other healthcare institutions. The ТС-80 thermostat allows continuous measurement of temperature in the working chamber and its visual display.

Advantages:

  • Digital display of temperature at the measurement point with a resolution of 0.1°С
  • High accuracy of temperature maintenance at the measurement point: ± 0.2°С within the range of 37°C to 60°С
  • Highly stable temperature sensor, accuracy class 0.2%
  • Good thermostatting performance at temperatures close to the environmental due to the decrease of the heater full power to 70 W
  • Control of temperature detector condition
  • Process blocking in case of detector disconnection or short circuit, or in case of change of temperature in the measurement point by ± 1.0°С
  • ТС-80 thermostat has a conveniently located control panel on the door at operator eye level
  • High interference resistance allows operating in the conditions of industrial interference.

Additional Information

Exterior dimensions of working chamber

 400 х 400 х 500 mm

Volume of working chamber

80 L

Maximum temperature range of thermostatting

 environmental Т +5…. to 60 °С

Limit deviation of stabilization temperature, °С

25 to 45°C: –1 to +1
45 to 60°C:–1.5 to +2.6

Stabilization rate at maximum temperature in the working chamber, minutes, not more than

 120

Continuous run time

 500 hours

Power supply

 220 V / 50 Hz

Power demand, W, not more than

 250

Weight, not more than

 60

Exterior dimensions

 615 х 650 х 1250 mm